How To Sand Your Hardwood Floors: A Step-by-Step Guide


Sanding hardwood floors can seem daunting. With the right tools and a bit of elbow grease, you can sand hardwood floors like a pro with the help of the following guide.

Let’s take a look at the steps to sand hardwood floors.

How to prepare hardwood floors before sanding.

Clear out the space and take down any rugs or furniture. You will need to vacuum the floor after you have cleared out the space.

It doesn’t have to be empty, but it will make it easier.

Use a hammer or a nail driver to remove any nails that are sticking out.

The next step is to clean the hardwood floor. Use a pH neutral cleaner to vacuum and then mop the floor. To remove any remaining dust, wipe the floor with a tackcloth.

Once the space is ready and prepared, it’s time to move on to the next stage: selecting the right tools.

What tools are best for sanding hardwood floors?

You have a variety of options for sanding hardwood timber floor sanding. There are three options for sanding hardwood floors: an electric sander or a hand-held sander. Sandpaper is another option.

An electric sander is the best option if you plan to rent one. These are much easier to use and can save you time and effort.

For small spaces or tight spaces, hand-held sanders work best. We don’t recommend hand-held sanders if you have a lot to cover. It will take forever and leave your arm very sore.

This guide will show you the top electric floor sanders for 2022.

Sandpaper is the most time-consuming option, but it can get the job done. Sandpaper is the best option if you are sanding by hand. Start with a higher grit and work your way down.

How do you sand hardwood floors?

Once you have all your tools, it is time to get started sanding. Before you start using an electric sander make sure you read the instructions.

Begin in the far corner of the room, and work your way back towards the door. It will be easy to get out of the room when you are done.

Use consistent, even strokes and not too much pressure. The top layer of finish can be sanded off, but the wood underneath must not be damaged.

To avoid missing any spots, work in smaller sections and use the sander slowly.

DIY or Hiring a professional

You might wonder if hiring a professional is worth the effort now that you are able to sand hardwood floors.

Although it might seem more expensive to hire a professional than do it yourself, it will save you so much time and effort.

Professionals will be able do the job better because they have more experience. This saves you time and money on potential do-overs.

A professional may be more affordable in the long-term because they have better equipment and sandpaper.

Are professional sanding hardwood floors cheaper than hiring someone?

There are a few things that will affect the answer to this question. It will be more cost-effective to hire a professional if you plan on sanding large areas.

Some common mistakes in sanding can prove costly. For example, sanding too deep and damaging the wood, or using the wrong type sandpaper, which can ruin the finish.

These errors could cause you to have to replace the entire floor which will be more costly than hiring a professional.

If you plan on sanding large rooms or if you have never sanded floors before, we strongly recommend that you hire a professional.

Finishing your hardwood floor-sanding project

After you are done sanding, it is time to apply a new coat. This will protect your floors, and make them shine and new again.

You have a variety of options for finishes, including oil-based, water based and polyurethane.

Water-based finishes are easier to apply and less odourless.

After you have chosen your finish, follow these instructions and spread it evenly on the floor.

It is important to work in an area that is well ventilated as fumes can be very strong.

You should vacuum the floor and sweep it to remove all dust or debris after the finish has dried.

To allow the time for the set to complete, you should not be on the ground for more than 12 hours.

Long-term maintenance of hardwood floors

You’ll want to maintain the hardwood floors’ beauty after you have finished sanding and finishing them.

You should vacuum the floor and clean it regularly. Avoid walking on the floor in shoes, as it can cause damage to the finish.

You can instead use slippers at home or place rugs in high-traffic areas.

These steps will ensure that your hardwood floors last for many years.

Spills can cause damage to the finish if not cleaned up quickly.

You can use a mild cleaner with a soft cloth to remove more stubborn stains. Avoid harsh chemicals that can cause damage to the wood.

Wrapping up

Although sanding hardwood floors can seem daunting, it is worth the effort. It is important to take your time, use the right tools and give the floor a high-quality finish.

We recommend that you hire a professional if you aren’t confident in your abilities.

You’ll have beautiful floors for many years!

Leave a reply