Five Tips for Quicker Easier Water Blasting

It’s a good time to use a water blaster as the weather begins to warm up. This will help you remove the grime from the walls, fences, and decks that have accumulated over the winter. Here are five tips for making water blasting easier.

Safety First

Water under high pressure can pose a number of risks. Remember that a water blaster produces a lot thrust and can cause you to move in ways you would not expect. Be careful, especially if you are working from a height. Never spray your feet or hands. Consider the debris field as particles and dirt can be thrown at high speeds. Always wear eye protection. Be very cautious around electrical connections, particularly meter boards. It is not a good idea to flood an electrical fixture.

Low Pressure is the Best way to Start

Water blasting at high pressure can damage older paint and facings. You can start with lower pressures or a wider angle water blaster until you’re sure that the surface can handle high pressure.

Angle your Washing

It is better to aim the nozzle in a 45-degree angle than at a perpendicular one if you want to remove stubborn paint and dirt. Keep the water sprayer at a constant angled.

Walls can be Washed from the Bottom

Use a broad horizontal motion while maintaining a constant angle and distance from the wall. You can easily see the areas you’ve cleaned and avoid leaving dirty patches. After you’re done, clean the dirt off the wall.

Decks: Take Care

The highest pressure setting can cause visual damage to the deck and result in splintering. Use the water blaster on a lower pressure setting or at a greater distance. Water blast always along the grain. If necessary, walk beside the deck to maintain a consistent angle and distance. Reverse the deck by starting at a nail or bearer line. Applying exterior cleaning chemicals, or chlorine sprays can also improve the appearance of your deck. For professional results, consider water blasting services in Auckland.

After you are done, drain all water from the hoses and water blaster. Store and transport your water blaster in an upright position to ensure that the oil from the high-pressure pump is in contact with all the important components.